Tropical Fish Keeping banner

1 - 6 of 6 Posts

·
Banned
Joined
·
750 Posts
Discussion Starter #1
Since I don't use my intake from my Eheim 2128 and use the Eheim Installation sets instead, I decided to put the original Eheim intake to good use for my water changes/filling...



This is what I used...
- Eheim 16mm/22mm intake tube
- 2" piece of Eheim 16/22mm tubing
- 2" piece of Python tubing.placed some tubing (Python and Eheim tubing)
- A 1/2" (size of Python tubing) to 5/8" barb (size of Eheim tubing)
- Python connecters
- Pre-filter sponge, used from my Mag drive pump

I cut the intake tube and connected the appropriate tubing and connectors, which look like this...



After it's assembled, it will look like this...



Lots of people use PVC piping, which is cheaper, but I think it's ugly looking and to clunky to carry around.
 

·
Banned
Joined
·
786 Posts
Folks:

I have wet/dry.

If my current Python "set up" was not "so easy" to use I would valve the "tank side" of the pump in order to implement water changes.

As with my Python "set up" I would use the waste water to water the plants in my back yard via tubing or piping.

I currently use a garden hose with my Python "set up" and move it to different groups of plants as the ground becomes saturated.

TR
 
1 - 6 of 6 Posts
Top