Tropical Fish Keeping banner
1 - 7 of 7 Posts

· Registered
Joined
·
389 Posts
Discussion Starter · #1 ·
I finally got some scrap pieces of plexi glass from my teacher and wandered if anyone here could give any advice. Like how to put it together (silicon?) and how to cut ect.

Is it ok to use plexi glass?

Can some one give some i deas of what to build. Nano reef maby?
Or since the peices were small was thinking betta 3 section condo.

Here is the pic of the pieces.


Here is a pic with a psp and a 10 dollar bill for size.


If i did do a reef i thought i would do something like this.


I can give some demensions if someone wants (if you have any ideas for me!!)

Here is the pics of the betta condo. I would build 3 spaces not 4 probably.


Any ways while i was writing this i started to like the idea of the nano reef. Whats a really!!!! cheap light i could put on it and some live sand/ rock. Also what could i keep in it (coral fish inverts). Also should i build like a false wall or something and do i need circulation?

EDIT: I foud a light that might work depending on size i might have to get a 12 inch one. http://www.bigalsonline.com/BigAlsU...83409/cl0/coralifesaltwater9miniaqualight2x9w

I also found some pico pumps and powerheads that are cheap if i do a false wall.

And i forgot to menchion up there but there is still a piece at school that a big square that i couldnt fit in my locker. I might be able to use it as a botton because there are scratches on it.

Thanks alot!
 

· Registered
Joined
·
389 Posts
Discussion Starter · #6 ·
wont the weld on get stuck in the suryng?
Would silicon work?

And the thikness is about 3/4 of an inch.

It would cost more to buy the tank because i might have to put deviders or a false wall in.
 

· Registered
Joined
·
389 Posts
Discussion Starter · #7 ·
Oops don't know why it double posted. Thanks for the info. I think im just going to wait for the money to roll in to get a 20 gallon sw tank. Im also thinking if i take the peice from my school i could get 4 sections. What it small enough to fit in tiny section of a tank other than a betta. Some sort of terta or something really small i can have a few of.

P.s can i use weld on to do the inside seals?
 

· Registered
Joined
·
389 Posts
Discussion Starter · #9 ·
So i don't need to glue the peices together?

SAnd i desided on a new on that i can show later. Its gonna be for tertas or platys and theres gonna be a little section for a betta. theres gonna be a filter and a light to. Or should i just leave out the betta. how many tetras or platys can i get in a small tank?
 

· Registered
Joined
·
389 Posts
Discussion Starter · #12 ·
Sorry i meant to say 1/4 of an inch. And im buildin it because wheres the fun in buying?? lol! Oh ya and i have a new design, im using an almost square piece as the bottom. Then when i get some money i can convert ino a reef maby.
 

· Registered
Joined
·
389 Posts
Discussion Starter · #13 ·
So i came up with the final design hopefully. Im gonna make 18 long 12 1/2 wide and 8 inch tall fw tank. Im going to put some sort of tetra or platy of some sort in it with some plants probably later on. This might become a reef later on. Is it deep enough for a fw tank?. With the extra stuff i will build a 3 compartment betta condo. I will do the betta tank first so if i mess up its not the big tank.

I can get some drawings i made on google scetchup later.

If i put a heat redirector over the heater grate do you think it would be a problem to have it over top of it? Well anyways ill try it.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top