Tropical Fish Keeping banner

tint of green.

4K views 14 replies 4 participants last post by  allan 
#1 ·
I have a 90 gallon freshwater that I set up about 2 years ago ,I have about 5 African cichlids that are doing well.
I have an aqua clear 120 that has been and is still working great and I have a power head that really circulates water well.

I run the light about 5 hours a day sometimes 4.Well about 2 weeks ago I did my normal cleaning routine except this time (and dont ask why I know it was wrong)
I changed all my bio beads in my aqua clear.about 2 days later I notice my tank to be really green and growing algae ,I was guessing because I changed those beads and lost allot of good bacteria.
SO I took about 35-40 gallons of water out and really scrubbed my tank good to get rid of the green.
Now its about 7 days later and my fish are doing well but I still got that green look in my water but I can visibly see any algie on the glass.
Would there be a case the algae is on there and I cant see it,
If so what do I use to clean it off ?
If its not algae what is that green tint to my tank?

Troubled and need advice.
 
See less See more
G
#2 ·
Welcome to fish forum..
A few questions have you been testing your water regularly? How has it been testing? Most importantly how high have the nitrates been? High nitrates can lead to algae blooms.
Do you have any live plants in your tank?
 
#4 ·
It sounds like you are suffering from an algae bloom. There can be a good many causes for this, However it is very unlikely that removing the bioballs is one of them. I suppose that removing the Bioballs could envoke a mini cycle and tip the water conditions to something more favorable for algae growth. Algae needs two things to grow, light, and a food source. If the tank went for that long without a problem, then I would look for the source to be either an increase of light, or an increase of food (nitrates). I would start with a few weekly water changes and more frequent testing. The source of an algae bloom can sometimes be a tricky thing to pinpoint. If you have too much of problem identifying the source, you may want to save yourself the hassle and just invest in a UV Sterilizer. Though i generally dont support correcting a problem without first identifying the source, the addition of a UV Sterilizer will likely clear up your green water problem with great haste. If you do take that route, mind your Nitrate levels as I consider algae blooms to be a good indicator that something else is awry. Over feeding, failing to remove dead fishes, inadequate substrate maintainance, and improperly cared for plants are all very common causes of poor water quality.
 
#9 ·
yes there is a problem. Due to the excess in Nitrates from lack of water changes algae starts to grow. Your algae would then eat some of the Nitrates making your water tests fine. When the excess nitrates rose high enough an alage bloom started. Your removal of the filter pad thingy wouldnt cause much problems but your activated carbon must have worn out so it wouldnt asorb the alage. UV sterilization is fine but can be very expensive. I would suggest you buying an algae eater like an Oto or a Siamese Algae eater to clean up the problem and you should do more frequent water changes. You say your tests are fine but you need to tell us the exact results.
 
#10 ·
I had a plecostimis and 2 Chinese algae eater but my Africans ate them...I will start doing more water changes thanks for your help.

I just dont see any algae on my glass at all..its just seems to be in the water,all parts of my glass look really good.
 
#14 ·
allan said:
well it looks as if I need the barley ,has anyone ever done this?
Eric Triplett(The Pond Digger) had suggested the use of barley in ponds where green water is commonly seen. You might as well need it in your tank but you still have to monitor your water parameters especially phosphates. High phosphate level is one of those that cause green water.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top