All you ever wanted to know about Protein Skimmers
Other than the biological filter, there are basically 2 theory on filtration on a Salt Water tank to remove organic waste within an aquarium. That's the Refugrium or the Protein Skimmer. In this article I will cover the basics of what I know about skimmers to help shine some light on the theory of skimmers and reduce confusion.
Protein skimming is the only form of filtration that physically removes organic compounds before they begin to decompose. It lessens the load that the biological filter has to work, increases the oxygen in the water column, allows one to have a much larger bioload within an aquarium, and is known to lower phosphates when used in conjunction with a kalk reactor drip. This is why I personally endorse them as the BACKBONE of any successful reef aquarium.
How does it work?
Protein skimmers are basic in theory. Basically it's a chamber where all the aquarium water eventually passes while being highly aireated with a large amount of tiny bubbles. Generally the smaller the bubbles, the longer the contact time with water and bubbles, and the more generous amount of bubbles, the more efficient the skimmer. The theory is that as the water is aireated and a froth builds, protein, amino acids, and waste will stick to these tiny bubbles and rise into a collection cup where it is seperated from the aquarium water and collected for disposal. If you've ever taken a bubble bath you've probably experienced this. Yes, it's the soap scum build up along the surface of the tub water during a bubble bath. This process in a SW tank is highly efficient at taking out waste before it creates havoc. Remember, reef tanks in general require strong lighting, and any means of reducing waste in the tank is highly recommended.
General types of skimmers.
There are a many types of skimmers out there that cause major confusion to hobbiest so I will try to explain a few types, their theory and their advantage, and their disadvantage.
Air stone skimmers
These were the first types of skimmers to have ever been used in SW tanks.
This type of skimmer gets the air from an air pump and typically has a water pump supplying the chamber with aquarium water. The advantage to this skimmer is that it's relative inexpensive, however this type of skimmer is generally not too efficient. Not enough water can be passed through the chamber and not enough air can be fed into the skimmer unless the skimmer is built to a rather large scale. This kind of skimmer generally would be used on a smaller aquarium with a light Bio load.
Down draft skimmers.
Downdraft skimmers uses a powerful pump to "ram" water down into the chamber causing bubbles to gentrate, froth builds and floats back up into the chamber towards the collection cup for removal. Think of it like a can of soda pop. If you shake the can violently it creates many bubbles and overflows through the opening. This is similar in theory to the downdraft. The advantage to this skimmer is that it's very efficient in generating bubbles, can filter large amounts of water and generally is a good skimmer. However the big disadvantage is that it requires a rather powerful pump that consumes alot of electricity and you can't control the size of the bubbles being generated.
Mesh wheel, Pin wheel Skimmers.
This is my favorite skimmer because I think it is very effiicient and consumes little energy.
This kind of skimmer uses a pump to supply water into the chamber. It normally has some kind of venturi that draws air into the chamber. the wheel inside the pump is generally modified to chop the air into micro bubbles causing tons of bubbles floating into the chamber towars the collection cup. In my opinion it's the best of both worlds. Small foot print, filters lots of water, creates tons of micro bubbles and alot of contact time making a great skimmer. The disadvantage is that it can be an expensive skimmer.
A normal pump impeller.
a picture of the modified mesh impeller that chops the bubbles into micro bubbles.
another picture of a modified pin version impeller.
There are many other types of skimmers out there with different technology, but i wanted to get the information out on the more commonly available skimmers that are out there. There are also skimmers that ae internal to the sump or external to the sump. The advantage to the external types are that the skimmer size is not confined to the size of the sump, however the great danger is that if you are away from the room where the skimmer sits, it can overflow and empty the entire sump onto your floor before you realize what happened!
Hope this helps and happy reefing!
|All times are GMT -5. The time now is 10:57 AM.|
Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.