Vivarium Basics article
I wrote this a while back when another site I follow was starting it's own viv forum. Thought it might be useful here...
A vivarium is usually defined as a half-land, half water set-up for reptiles. That is slightly incorrect. A vivarium is actually a land only set-up for reptiles/amphibians, while a paludarium is the half aquarium/land set-up that most people think of first. For the sake of this forum, I will use â€œvivariumâ€ to cover both types. I am also going to assume that you have never had any reptiles before, but have knowledge of basic fishkeeping. So if you are an experienced reptile keeper, please excuse the â€œbeginnerâ€ lingo and basic reptile knowledge.
The first thing you must know about vivariums is the needs of your particular reptile or amphibian. We are all well versed in the needs of our fish, so the aquarium portion of the tank will be second nature to us. We know the water needs filtration (regardless if the water portion has fish or not), stagnant water is no good for any plants or animals. We also know that good lighting and upkeep go along way in making a aquarium work. The same things are important with a vivarium. Here's how to get started. I am going to assume that you have a specific reptile in mind, and are going to build the tank around them. Not buy the tank then fill it. If you do it the second way, you'll need to flip-flop a few of the steps below. But eventually you will end up with the same thing. A tank and a reptile.
1. Research the needs and behaviors of your reptile. Does it prefer low humididty? Is it nocturnal, diurnal or crepuscular (active during twilight)? Does it have the ability to co-habitate with other species, or is it a predator that will eat anything that moves? Will it eat fish (in the case of setting up a paludarium)? I find it best to research and write down a list of specific needs, per species, so you can have a side by side comparision when picking out your reptiles. FAQ's are nice, but having 5 printouts of different reptile and anuran (the correct name for the frogs and toads line of amphibians) species can be a pain to sift through. You also need to decide whether a paludarium or a vivarium is what you are trying to accomplish, based on the needs of your reptile/amphibian. I recommend http:/www.kingsnake.com as a starting place for your research. They have the most extensive, up to date listings on reptile laws, species care, and also have an educated community of people willing to share their experience. I am not including basic food and water needs in this essay. Such to say, I am not going to tell you what or how to feed your reptile/amphibian, that is your job as a responsible keeper to educate yourself.
Do NOT buy the animal at this step. Impluse buys with reptiles are as bad as unprepared buys for fish.
2. Tanks size. Next you need to decide exactly what size tank you'll need for your reptile. I use the word â€œtankâ€ loosely, because I have seen viv's in anything from a normal glass aquarium to metal horse water tubs, to whole custom made rooms in someones house. Pick out a tank that will hold your reptiles comfortably at their ADULT size. (Once again, please draw parallel between fish and reptiles). Pick something that is large enough for the reptile, and allows you to work creatively. I find with beginners, starting with a larger tanks gives you more options when it comes to dividing the tank (paludariums) and setting up a complex filtration system if needed.
3. Lighting. Does your reptile require UVA and UVB lighting to thrive? Reptiles and amphibians use UVB to help utilize calcium in their diet to build strong bones. This is a heavily debated subject among keepers. There are people on both sides of the fence on this one. Some reptiles thrive without UVB light, but their colours emerge more clearly with it. I am pro-UVB just from my own personal experience. Even a nocturnal animal will emerge from it's hiding spot to bask in the last rays of the sun.
Reptiles are exotherms just like fish. They require an environment that allows them to thermoregulate their body temperature. This is usually accomplished by the use of a basking light at one end of the tank. The other end of the tank is cooler, and the reptile moves from one end to the other, depending on whether it needs to raise or lower its temperature. BEWARE: basking lights can be VERY hot. They can melt plastic lids, so a screened top is usually used for reptile tanks that require high output basking lights. For intance, a bearded dragon is a desert dwelling lizard. It's basking sites can be 100+ degrees F. That is much hotter than the average aquarium light. Also, make sure that your lighting system can handle the wattage output of the bulb that you plan to use.
Most people (myself included) use a combination of incandescent lights for heat, and flurescent bulbs for UVB light. There are bulbs that do both, but they are rather expensive. I would suggest a beginner keep to a simple set-up, in the event that you lose interest in the hobby, you haven't spent large amounts of money one something you may never use again. Also, a timer can be used to regulate the light cycle. I use 12 on 12 off for my reptiles, but that changes when I want to induce breeding or brumation (a semi-hibernation most reptile can go through in the winter months). Research the best timing for your reptile and buy a quality timer and power surge strip. Coralife sells a combination of the two that is very convienient.
Amphibians on the other hand, bask much less that their reptile cousins. Most anuran tanks are heated ambiantly. Meaning that the temperature of the tank is constant throughout, due to lighting and water temperature. Make sure that your lightingon the amphibian tank doesn't lower the humidity too much. Misters are also helpful in regulating humidity in a tank. The goal is a good balance between temperature and humidity.
Other questions to ponder: Are you going to have live plants in your vivarium? Aquatic or terrestrial? Will your reptile eat your plants?
Research the lighting needs EXTENSIVELY(can I emphasize this any more?). They alone can mean life and death for some reptiles.
3. Water- If you are going to have a paludarium, I would suggest a sumbersible filter. I've used several brands and find Duetto to be a good company. Their filters are quiet, run smoothly and are easy to clean. Reptiles and amphibians can be very high waste producers, so there is no such thing as overfiltration. These filters can be easily masked with driftwood or other dÃ©cor, just like you can do in a fishtank. If you plan on having fish, you already know the needs and how to set up the water half of your tank competantly, so I will focus more on the terrestrial portion of the set-up. Also, I am focusing on a terrestrial set-up in a tropical/semi-tropical environment. Desert dwellers have a whole different series of set-up requirements.
4. Decor and basic needs- start collecting dÃ©cor. This can be anything from driftwood to rocks to plastic plants from your LFS. Basically, you're going to need the same thing as you would for a fishtank: hiding places, good substrate, plants, etc...There are a million different choices on the market, and you will need to make decisions based on your reptile/amphibians needs as well as practicality. For instance, since your herpetile (a name for both the reptile and amphibian groups combined, usually abbreviated â€œherpâ€) will be travelling from water to land and back again, be aware that terrestrial substrate will end up in your water. Floating bark is easier to remove, but has the possibility to change the water conditions. Some people will have a land based section, followed by a â€œbeachâ€ of pebbles to keep substrate out of the water. This works well if you have a herp that doesn't dig. Diggers will mangle a tank in less time than it takes to blink. With a herp that likes to bury itself in the substrate, a simple set-up is much easier to care for...substrate that is easy to dig in and a few rocks will save you much time in maintainence. Herps will also sometimes eat substrate and decor. Pac-man frogs are famous for eating aquarium gravel. If it fits into their mouth, they will eat it. Turtles will eat gravel too. But this can be prevented by knowing the specific needs and behaviors of your herp. Beware of materials that could leach toxins into the environment. Driftwood and rocks can be cleaned using the same methods of boiling and baking used in the aquarist hobby.
Here are some steps for piecing a paludarium tank together. There are other ways to do all of this, but I will tell you some of the most basic.
Dividers- to seperate the land from the water. Usually a glass sheet siliconed into the tank, spliting it into two sections. Check that you don't have any leaks by filling only the water side and leaving it for a while. If you have water on the land side, dry the tank completely and re-silicone. NOTE: This sheet should have smooth edges on the top to prevent any glass shards from piercing your herp.
Land section: If you want a â€œbeachâ€ area, insert a piece of cardboard behind the glass sheet (on the side that will hold your land) to form a channel that will hold only pebbles. On the land section, dump about 1 inch of small pebbles. Then add soil if you are adding plants, leaving room at the top for the groundcover (coconut husk, bed-o-beast, moss). The groundcover should be level, or just below, the height of the glass divider. NOTE: Avoid potting soil that contains â€œpearllightâ€-the little styrofoam balls, or â€œvermiculightâ€the silvery gold flecks- these both can cause impaction in your herps if eaten. Avoid soils with any sort of fertilizer or additives. If you can find organic compost, even better.
Now, you should have only the space between the cardboard and the water to fill. Fill this with pebbles, then slowy remove the cardboard, leaving the â€œbeachâ€. Add rocks, driftwood, coconut huts and anything else you would like to add to your tank. Don't forget many herps like to climb, so utilize the vertical space in your tank with branches, vines, and shelves of wood and rock siliconed to the sides of the tank.
Go ahead and set up your basking site (if neeeded). Most people use a flat rock so the herp has a place to fully streach out without having to keep his balance. Some reptiles will bask on branches, so a well placed branch will work the same as a rock on the ground. Also, if your herp requires food and water dishes, provide a place for them as well.
Set up your water portion, lights, filtration, mister, etc...and let your tank set for several days. Check the temperature and humidity twice daily to regulate any â€œhiccupsâ€ in your set-up. Now you are ready to introduce the inhabitants.
Picking out quality specimens should be a top priority. Look for an animal that is in good health, eating well (ask for a diet sheet so you know what the animal was eating before you got it), and generally acts â€œnormalâ€. Don't base your decision on activity level, as some herps, such as frogs and toads, don't move much compared to other types of animals. Quarantine new arrivals (if you are going to have more than one herp in your tank) as usual, and watch for disagreements between tankmates. Also, make sure to check the local laws regarding your herp. Some state are much more strict on the sale and owning of reptiles. Obtain all needed liscences and permits.
This is a basic set-up overview, I did not cover disease prevention and treatment, nor feeding. I did this for a specific reason, because there are a million ways of keeping herps, each one with their different requirements and concerns. I cannot emphasize enough how important it is to just take the time to research it and make an educated decision.
I will probably edit and post updated versions of this essay in the future, so please remember it is not 100% complete
-Ariane (â€œSirenâ€) Feb 5, 2007.
Nicely written! :D
Re: Vivarium Basics article
Ummm okay well do you know any good live and hardy plants that will make a good adition for terrariums? like i like vines and moss but dont know where to find them and i dont know if i can use soil with fertilizers in it for my toadies because i wanted to buy it in bulk from home depo or lowes or a hardware store so if anysugestions btw is it true that if you put like a lil pool (ceramical) that will fit the toad in instead of the toad pooing in the soil itll poo and pee in the water so is that true? and for american toads whats better sand or soil? would it be alright if for a part of an ornament i use "chia seeds" (mint plant) for the top of a hidding spot? can you list all plants that are able to be used with an american toad and most ppl dont have allergic reactions to? also is there a way so you can basically kill every germ in the tank yet wont harm the toads? like i thought of using dish washing soap mixed in a boiling water solution to fill up the tank and stir it and leave it like that for 30mins-40mins till its all clean and then rinse it five-eight times with more hot water and then cool it off and then make it dry and put the soil in there moist the soil apply the moss and plants and ornaments and then feed the toads and let em poo in somewhere else....and lastly put the toads in the terrarium (i think i have two american toads and a fowlers)
deku DO NOT USE SOAP TO CLEAN A TANK! soap leaves residues behind and will kill/harm all tank creatures.
as for your questions about toads, i think you'll get more responses by posting a new topic with the question in the title.
Is a paludarium a synonym for a terrarium? I know that a terrarium is a half-land, half-water setup. Or maybe it's just some of both, with no real need for percentages.
|All times are GMT -5. The time now is 12:03 PM.|
Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.