An Idea for a DIY Filter.
I have a Fluval 1 Plus and a TopFin Power 30 filter. For the Topfin, I'm thinking of making my own filter, maybe for the Fluval as well.
What I was thinking about doing is taking the frame from the Biofilter that I have in now, take a sock for wet/dry filters, and fill it with carbon chips, put it in, then put some ceramic filter media behind the "new" filter itself, maybe something that would polish the water. Does anyone have any ideas that would improve this?
For the Fluval, I could put in a sponge that will go up as high as the intake slates, then put some carbon or ceramic to fill the rest of it up. The slats only go up about an inch and a half, the filter itself isn't that tall.
Also, if anyone has done this before and had good results, I'd appreciate some tips on products you used.
Le Reserved for Mah Pictures of the thing
|All times are GMT -5. The time now is 08:55 AM.|
Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.