RO/DI Piggyback System
Do they make a piggyback systems for a 35gpd system. I'm looking to reduce my waste water (guilty conscience I guess). The system I have is a Kent Marine HI-S Maxxima 35gpd.
Here's a link to see some pictures of the unit.
It also requires at least 65 psi available to the first membrane or it will not work, many dual membrane systems use a booster pump to attain this pressure.
I ran a dual membrane Spectrapure system for a couple years and it was nice if you need the extra water in a hurry, I could make 250 GPD at over 99% rejection rate but still at the normal 4:1 waste ratio."
Courtesy of AZDESERTRAT Water expert
|All times are GMT -5. The time now is 07:53 PM.|
Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.