Biocube 29 Hydor Slim Skim Protein Skimmer FITS in CHAMBER 1
Here are some quick snap shots of the Hydor Slim Skim Nano Protein Skimmer fitting in Chamber 1 of the Biocube 29gal.
This allows you to run a quality skimmer without having to sacrifice your refugium in chamber 2 or hiding all your probes,heater, etc. (any accessories) in chamber three.
I hope this helps future (and current) Biocube owners see one more possible option when selecting protein skimmers.
looks good.. anyway to raise it up to get a dryer skim?
I am currently running it higher so i get that real dark nasty stuff that we've all come to admire from a skimmer. I would say i empty the cup maybe twice a month......but it all depends if there's any new additions to the tank (fish or coral).
So you did remove the smaller inner trim around the first chamber?
I'm assuming you did since you have it the skimmer half way in.
Have the power chord and airline tubing run along side the skimmer not the back (along chamber 1 & 2 wall).
There are a couple of small tabs about half way down in the chamber. This used to be where the filter cartridge went before they reengineered it to lay across chamber 2. I believe this is what you are hitting.
Push the skimmer in till you hit those tabs. When you do, lift the skimmer up a little and try to angel the bottom of the skimmer towards the outer wall of chamber 1 (not next to chamber 2) while running the chord and airline tubing along chamber 2 wall.
I can annotate my pics more it you still can't get it.
It was a tight fit at first, but it does fit. Once you get it, it becomes much easier.
Let me know if you still have trouble.
Posted via Mobile Device
|All times are GMT -5. The time now is 02:04 PM.|
Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.