OK, I've got the 55G set up and running. Had to wait on the canister filter so I'm running the Aqua-Tech 30-60 filter. Am going to try and keep up with the cycle and keep a log of photos as I go. In the photo below the red arrow indicates the shrimp prawn in the stocking for the "fishless" cycle technique. The water looks blue due to being cloudy and my cameras white balance being off. I've added API Stress Zyme to help jump start the cycle too. I also added Seachums Flourish for the small swords I've got planted. I will add the Flourish and Stress Zyme as per directions. I will keep a log on the water test results as I go too.
Water test Results - Day 2
PH = 7.6
Hard PH = 8.2
Ammonia = almost .25 ppm
Nitrite = 0 ppm
Nitrate = 0 ppm
My one suggestion at this stage would be to narrow in on one of the pH tests, not using both. Otherwise, this can get complicated. The one to use is the one that is closest to your tap water pH. Confirm the probable pH with your water supply people, and use the test that corresponds in range.
When testing pH of tap water, always allow the CO2 to outgas for a more accurate reading. This is done by letting a glass of water sit out overnight, or you can put some tap water in a jar (say 1/4 full, not much) with a lid and shake it vigorously. This causes to CO2 to dissipate out of the water and the pH test will be closer.