DIY Sump Tank
Tropical Fish

Tropical Fish Keeping - Aquarium fish care and resources » TFK Resources » DIY Aquarium » DIY Sump Tank

DIY Sump Tank

This is a discussion on DIY Sump Tank within the DIY Aquarium forums, part of the TFK Resources category; --> This is just a rough draft of my DIY project. I'm at work so I'm not able to add pics yet. Just wanted you ...

Reply
Old 10-03-2006, 07:29 AM   #1
 
DIY Sump Tank

This is just a rough draft of my DIY project. I'm at work so I'm not able to add pics yet. Just wanted you guys to look it over to see if there are any changes that should be made or I forgot something. Thanks.


How to build your own sump

1. First thing to a sump is the tank or a rubber maid tub. Whichever way you go you need to make sure that it is big enough for the main tank.

Tank size Sump
Nano’s No need
30-75gal 20gal
76-125 30gal
126-up 40-55

2. The next step is to get an overflow box. (note: If you how a reef ready tank there is no need to have an overflow box.) What you want to do is adjust the box that goes into the tank to the water level that you want inside your main tank. How you do this is by loosening the screw that holds the two boxes together and adjusting the box to the height you want and then tighten the screw. Once this is done. You will want to attach the hose that goes from the overflow box to the sump. The hose should be about 11/2” (check the diameter of the over flow box to be sure) the best hose for this is the hose that your washing machine use’s to drain itself.

3. On to construct the plumbing to return the water back to the main tank. You can do this with ½” PVC piping(6). What you will need and this will be different for everybody is about a 5 foot piece of PVC pipe(6), some PVC piping elbows(5), PVC cement, a saw to cut the pipe, about 2-3” of rubber/plastic tubing(1), a ball valve(not pictured), I don't know what the piece is called but it a PVC piece that you can attach a hose to(2), and The piece to screw the hose to the actually PVC pipe(3). Next you want to draw up a plan to build the return plumbing. That is entirely up to you how it’s going to be run. PVC cement will not harm the fish. After completing the plumbing drill a small hole in the piece that is in the main tank just below the waterline. (This is to ensure that if the power was to go out that the hole stops the water from back flowing to the sump a lot sooner then if there wasn’t a hole.

3. Next step is to fill the sump with water if you want you can put live sand in it and put some calerapa algae. When putting the protein skimmer/pump in it is a good idea to put a fabric of some sort around so that the debris that enters the sump doesn’t get sucked back into the main tank.








usmc121581 is offline   Reply With Quote
Old 10-03-2006, 08:58 PM   #2
 
Lupin's Avatar
 
Seems ok to me.
Lupin is offline   Reply With Quote
Old 10-03-2006, 09:26 PM   #3
 
looks good :D
joeshmoe is offline   Reply With Quote
Old 10-08-2006, 11:45 AM   #4
 
Does anyone know how to move this to the DIY section.
usmc121581 is offline   Reply With Quote
Old 10-08-2006, 11:50 AM   #5
 
Lupin's Avatar
 
Quote:
Originally Posted by usmc121581
Does anyone know how to move this to the DIY section.
Consider it done.
Lupin is offline   Reply With Quote
Old 10-08-2006, 11:09 PM   #6
 
caferacermike's Avatar
 
Would like to add that a sump on a nano is an awesome idea. I have a sump and fuge on my 29g "nano" fowlr. It allows for a hidden 25 gallons of water that help keep my parameters from swinging all over the place. I can lose a gallon of water to evap before I see my salinity swing.
caferacermike is offline   Reply With Quote
Old 10-09-2006, 07:37 AM   #7
 
Quote:
Would like to add that a sump on a nano is an awesome idea. I have a sump and fuge on my 29g "nano" fowlr. It allows for a hidden 25 gallons of water that help keep my parameters from swinging all over the place. I can lose a gallon of water to evap before I see my salinity swing.
Thanks for the info, Inever seen a nano with a sump and wasn't sure so I didn't want to say anything about it.
usmc121581 is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
tank to sump to sump to tank ? =] lilalancarey Saltwater Aquarium Equipment 0 04-15-2009 02:31 AM
New Tank, I need some help with a sump ScarFish Beginner Freshwater Aquarium 1 06-04-2008 09:26 PM
What is a sump tank and would i need it. SeaSerpant Saltwater Aquarium Equipment 8 12-18-2007 08:13 PM
sump tank trreherd Saltwater Aquarium Equipment 6 12-19-2006 02:08 PM
Sump Tank Michael Saltwater Aquarium Equipment 6 08-01-2006 04:36 PM


Thread Tools Search this Thread
Search this Thread:

Advanced Search



All times are GMT -5. The time now is 01:28 AM.