55 gal with out support - Tropical Fish Keeping - Aquarium fish care and resources
Reply
 
LinkBack Thread Tools
post #1 of 15 Old 04-06-2010, 09:29 AM Thread Starter
Member
 
bearwithfish's Avatar
 
Question 55 gal with out support

hey guys and girls i just came into a 55 gallon from a friend and it does not have the top bracket on it i was thinking i could make a support or some kind of Euro bracing but i need some advice on how to pull it off.. i have a bunch of glass around from another tank i dismantled a while back (dont ask long story) i was hopeful i could use that...
it is an old school tank (very thick glass) and water tight so i wont have to re seal it at this point.
i just want to be sure that if i set it up i dont come home to a water fall due to the seals breaking apart..

let me know what you think and any and all links and ideas are greatly appreciated....

Back in the Game!!! Live Bearers in a 40 Breeder
bearwithfish is offline  
Sponsored Links
Advertisement
 
post #2 of 15 Old 04-06-2010, 07:44 PM
Does it clearly have the center brace missing? I think on some old tank they may not of had center brace..... Either way when my old 55gal broke its brace, I just bought a metal strip that was kinda flat and maybe 1/4 or 1/2 " thick. I was bent into a shape similar to this [ . Its ends went on the outside of the plastic frame.

.... I'm probably drunk.

This is how I lurk


Mikaila31 is offline  
post #3 of 15 Old 04-07-2010, 01:04 AM
New Member
 
I agree, some older 55's didn't have center bracing. If it were me, I'd use an acrylic strip held in by gorilla glue or the like. You can get cheap thick acrylic from plastic manufactures usually out of their garbage bin, they'll cut if for you on the cheap.
rsn48 is offline  
post #4 of 15 Old 04-07-2010, 06:51 AM
Member
 
Angel079's Avatar
 
+1 on Mikaila with the kinda "U" shaped form that goes over tanks outside and across that'll gie you needed stability. While it is true old tanks didn't have that; I'd rather be safe then sorry not knowing if its not having one or missing and just build one for it cause once you get it set up & filled and its busted and leaking its too late to add a brace

~ Life Is Too Short, Break The Rules, Forgive Quickly, Kiss Slowly, Love Truly, Laugh Uncontrollably And Never Regret Anything that Made You Smile.
Life May Not Be The Party We Hoped For, But While We're Here, We Should Dance. ~
Angel079 is offline  
post #5 of 15 Old 04-08-2010, 08:06 AM Thread Starter
Member
 
bearwithfish's Avatar
 
no way to tell if it has been broken or what not as there is not top frame at all on it.. the bottom says O'Dell tanks... and the guy i got it from says is really old... but i agree i want to get some type of support so i dont have to worry ... i mean it can only help right? worst case i have it on and it never needs it but rather safe than sorry.... now if i go with a metal one (i am inclined to think this would be a better option) i was thinking i should coat it thickly with Krylon or the like to keep it from rusting as well as preventing and build up that i will have a hard time cleaning.. what do you think?

Back in the Game!!! Live Bearers in a 40 Breeder
bearwithfish is offline  
post #6 of 15 Old 04-08-2010, 09:34 AM
New Member
 
Tanks are held together by the silicone, the frame helps but the strength is in the seams. Still a brace is a fine idea. Don't use metal.

Fill the tank outside first if you can, esp if it has been dry for a while. Carry it from the bottom, do not move it with gravel or water in it.
Posted via Mobile Device
herbwin is offline  
post #7 of 15 Old 04-08-2010, 10:15 AM Thread Starter
Member
 
bearwithfish's Avatar
 
already filled it when i got it to test the seals and they are great!!! no metal huh?? so a piece of thick plexi with a small L bracket attached and glued? or just glue ot silicone to the glass itself? i have seen a few ideas i am not really sure yet is all..

Back in the Game!!! Live Bearers in a 40 Breeder
bearwithfish is offline  
post #8 of 15 Old 04-08-2010, 10:54 AM
Member
 
Angel079's Avatar
 
If you have no top to it anyway I'd pers construct a frame with center brace that houses your lights at the same time outta something like 1x4's coated with Killz.

~ Life Is Too Short, Break The Rules, Forgive Quickly, Kiss Slowly, Love Truly, Laugh Uncontrollably And Never Regret Anything that Made You Smile.
Life May Not Be The Party We Hoped For, But While We're Here, We Should Dance. ~
Angel079 is offline  
post #9 of 15 Old 04-08-2010, 10:58 AM Thread Starter
Member
 
bearwithfish's Avatar
 
hmmm interesting idea i was considering going with all glass flat lids but i kind like that idea also ...
i am learning to slow down the projects lol.....

Back in the Game!!! Live Bearers in a 40 Breeder
bearwithfish is offline  
post #10 of 15 Old 04-08-2010, 11:05 AM
Member
 
Angel079's Avatar
 
LOL getting lazy are we? I'd just pers pref to kill 2 issues in 1 built know what I mean? Nice wood frame overtop that houses lights and a brace across it in the center bottom for the tank and done deal.

~ Life Is Too Short, Break The Rules, Forgive Quickly, Kiss Slowly, Love Truly, Laugh Uncontrollably And Never Regret Anything that Made You Smile.
Life May Not Be The Party We Hoped For, But While We're Here, We Should Dance. ~
Angel079 is offline  
Reply

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Similar Threads
Thread Thread Starter Forum Replies Last Post
Tank support Kenny Borel Beginner Freshwater Aquarium 2 07-06-2009 02:40 PM
Support for rock, etc. csjasona Beginner Saltwater Aquariums 3 03-11-2008 11:34 AM
Can my 20g support any more fish? 00ej8 Beginner Freshwater Aquarium 4 01-22-2008 11:20 PM
Red Sea Max Support Mike Aquarium Products Reviews 5 04-25-2007 03:44 PM
Newbie, looking for help and support. Flatcoatluver Introduce Yourself 6 04-02-2007 01:04 PM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome