New Eheim 2213 filter
Tropical Fish

Tropical Fish Keeping - Aquarium fish care and resources » Freshwater Fish and Aquariums » Beginner Freshwater Aquarium » New Eheim 2213 filter

New Eheim 2213 filter

This is a discussion on New Eheim 2213 filter within the Beginner Freshwater Aquarium forums, part of the Freshwater Fish and Aquariums category; --> It came in the mail today... w00t w00t!!!! I'm really looking forward to setting it up tonight. It has been a morning from H.E.double ...

Check out these freshwater fish profiles
Jack Dempsey
Jack Dempsey
Kissing Gourami
Kissing Gourami
Reply
LinkBack Thread Tools vBmenu Seperating Image Search this Thread vBmenu Seperating Image
New Eheim 2213 filter
Old 04-12-2011, 02:09 PM   #1
 
iamgray's Avatar
 
New Eheim 2213 filter

It came in the mail today... w00t w00t!!!! I'm really looking forward to setting it up tonight. It has been a morning from H.E.double hockey sticks and I think puttering about with my aquarium is just the therapy I need. :)

My tank is 67g, planted, pool filter sand substrate, driftwood, and a few larger rocks piled into caves. I plan to not use carbon in the filter... if I put in the ceramic rings from my Aquaclear instead of carbon, will that be enough to not start a new cycle? Should I also cut the old sponge up into smaller cubes and put them in there as well? Or should I run both filters simultaneously for awhile?
iamgray is offline   Reply With Quote
Old 04-12-2011, 02:19 PM   #2
 
leogtr's Avatar
 
Talking

Quote:
Originally Posted by iamgray View Post
It came in the mail today... w00t w00t!!!! I'm really looking forward to setting it up tonight. It has been a morning from H.E.double hockey sticks and I think puttering about with my aquarium is just the therapy I need. :)

My tank is 67g, planted, pool filter sand substrate, driftwood, and a few larger rocks piled into caves. I plan to not use carbon in the filter... if I put in the ceramic rings from my Aquaclear instead of carbon, will that be enough to not start a new cycle? Should I also cut the old sponge up into smaller cubes and put them in there as well? Or should I run both filters simultaneously for awhile?
I love the 2213! I have it in a 20 gallon:)

I would run both filters thats a good idea!
leogtr is offline   Reply With Quote
The Following User Says Thank You to leogtr For This Useful Post:
iamgray (04-12-2011)
Old 04-12-2011, 04:53 PM   #3
 
aunt kymmie's Avatar
 
+1, I'd run both filters simultaneously for a few weeks.
H.E. double hockey sticks?? I'll have to remember that one!
aunt kymmie is offline   Reply With Quote
The Following User Says Thank You to aunt kymmie For This Useful Post:
iamgray (04-12-2011)
Old 04-12-2011, 05:11 PM   #4
 
underh2o's Avatar
 
I agree with Kymmie! Run them both for a t least two weeks and maybe more (no rush) You will love the 2213 . With a little care it will run for years.
underh2o is offline   Reply With Quote
The Following User Says Thank You to underh2o For This Useful Post:
iamgray (04-12-2011)
Old 04-12-2011, 10:44 PM   #5
 
iamgray's Avatar
 
Thanks for the replies! (And Kymmie, i thought H.E.double hockey sticks was a common phrase... maybe it's just because I'm Canadian, eh?) Forgive me if this question makes me seem a bit thick... but I'm just curious about what the difference is between running both filters simultaneously, and moving all of the old filter media into the new filter?

And, puttering with the fish tank will have to wait another day or two. Poop. I had other work to do that took longer than I thought. :(
iamgray is offline   Reply With Quote
Old 04-22-2011, 10:41 PM   #6
 
iamgray's Avatar
 
Massive thread bump!!!!

So the waiting "another day or two" turned into MANY days, as I just set the filter up tonight... as suggested, I am leaving the AquaClear running for a couple weeks alongside the Eheim.

And now for a few more questions, which are possibly stupid. The stiff tubing (elbow shaped) that attaches to the output hose sticks out really awkwardly and I don't like it... my stupid question is, does the spray bar have to be horizontal in the tank? And does it have to be above the water line? Right now it's stuck on an angle under the water, due to the shape of the stiff piece... I'm thinking of ordering another J shaped piece like the one that the intake strainer thing attaches to, and using that on the spray bar instead of the elbow piece, and then the spray bar will be vertical instead of horizontal.

Also, to make as little of a current as possible, is it ok to turn the spray bar so the holes point at the glass on the back of the tank?

And a side note... for a person setting up their first ever canister filter, the Eheim instructions were GARBAGE... I had to google installation instructions and found some that someone had typed out on another forum.
iamgray is offline   Reply With Quote
Old 04-22-2011, 10:50 PM   #7
 
Boredomb's Avatar
 
Quote:
Originally Posted by iamgray View Post
Massive thread bump!!!!

So the waiting "another day or two" turned into MANY days, as I just set the filter up tonight... as suggested, I am leaving the AquaClear running for a couple weeks alongside the Eheim.

And now for a few more questions, which are possibly stupid. The stiff tubing (elbow shaped) that attaches to the output hose sticks out really awkwardly and I don't like it... my stupid question is, does the spray bar have to be horizontal in the tank? And does it have to be above the water line? Right now it's stuck on an angle under the water, due to the shape of the stiff piece... I'm thinking of ordering another J shaped piece like the one that the intake strainer thing attaches to, and using that on the spray bar instead of the elbow piece, and then the spray bar will be vertical instead of horizontal.

Also, to make as little of a current as possible, is it ok to turn the spray bar so the holes point at the glass on the back of the tank?

And a side note... for a person setting up their first ever canister filter, the Eheim instructions were GARBAGE... I had to google installation instructions and found some that someone had typed out on another forum.

LoL I hated the instruction on my eheim also! To answer some question: No the spray bar does not have to horizontal I have my at a diagonal because I wanted some current from end of the tank to the other and that was the only way I could get my spray bar to fit on the width of my tank. I also I have my spray under the water level and it seems to work fine.It is fine having the holes pointed at the wall. You can also control the amount of current with the valves but that also controls the volume soo I am not sure if you want that or not just an option.
Boredomb is offline   Reply With Quote
The Following User Says Thank You to Boredomb For This Useful Post:
iamgray (04-23-2011)
Old 04-22-2011, 11:03 PM   #8
 
DKRST's Avatar
 
I have a 2217, it's great. I wanted less flow, so I purchased an extra spray bar. I then drilled both spray bars and put them together with a 1" piece of clear tubing from Lowes (my water siphon hose). The current's perfect, although now I have a 24" spraybar along the back of my tank. With a 55 gallon, even one spraybar won't fit in the width. I tried pointing it at the back wall, but I like the effect of a few plants gently moving.

You don't need two spray bars, the drilling of extra holes works well - just be careful not to drill through the back side by accident! If you reduce the flow, make certain to use the valve only on the outflow (return to the tank) side to avoid impeller damage!

My next project is to use a heat gun to bend the Eheim rigid tubing. I'll fill the tube with sand to avoid kinking it. It is an awkward tube design.

Last edited by DKRST; 04-22-2011 at 11:05 PM..
DKRST is online now   Reply With Quote
The Following User Says Thank You to DKRST For This Useful Post:
iamgray (04-23-2011)
Old 04-22-2011, 11:08 PM   #9
 
Boredomb's Avatar
 
Quote:
Originally Posted by DKRST View Post
If you reduce the flow, make certain to use the valve only on the outflow (return to the tank) side to avoid impeller damage!

Oops thanks DKRST forgot to mention that part.
Boredomb is offline   Reply With Quote
Old 04-23-2011, 12:28 AM   #10
 
iamgray's Avatar
 
Thank you both for the tips! I have the spray bar turned to face the glass now and I think that's all I need to keep the current down... after seeing the mention of a heat gun to reshape the rigid tubing, I had a brief moment where I thought "hey, that's a good idea... maybe I can borrow one from work for an evening and try that..." buuuuuuut I'll probably just order the same piece as the intake tube and end up ordering a bunch of other things that i don't really need, because that's just the way i roll.
iamgray is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
eheim 2213 sharelove Freshwater Aquarium Equipment 5 04-09-2011 10:26 PM
New eheim 2213 question KSASTER2 Beginner Freshwater Aquarium 16 03-31-2010 10:25 PM
Priming EHEIM 2213 LisaC144 Beginner Freshwater Aquarium 17 02-23-2010 12:36 PM
Eheim Filter 2213 is leaking Brian099 Beginner Freshwater Aquarium 4 08-02-2009 07:48 PM
Eheim 2213 Filter Question... gilfish Freshwater Aquarium Equipment 2 05-10-2007 10:10 AM


Thread Tools Search this Thread
Search this Thread:

Advanced Search



All times are GMT -5. The time now is 11:10 PM.